Jiří Janoš supplies the Laguna device for chlorine-free water treatment in the pool. It is an electrolytic system that uses the release of copper ions and thanks to it, the pool does not have to be complicatedly treated with chemicals against unwanted bacteria and algae.
The Laguna device is also suitable for ponds equipped with a filter unit. When using the Laguna device, it is enough to add only 1 gram of chlorine per m3 of water every 15 days and the water will remain in perfect condition and without the smell of chlorine.
Laguna contains an electronic panel with a microprocessor, a flow vessel for electrodes, copper electrodes and the necessary cables for connection.
The Laguna device works in cooperation with a filter unit, where electrodes releasing copper ions into the supply pipe are installed.
Sales, e-shop, installation, services:
- Laguna device for chlorine-free water treatment
- chlorine-free water treatment in the pool.
Specifications:
- size: 140 x 190 x 45 mm
- weight: 550 g
- supply voltage: 230 V AC
- power consumption: max. 3W
- protection: IP 40
protection class: I
- max. cable length for electrodes: 15 m.
After the 1st week of operation of the Laguna device, we reduce the CL to 50% and check the pH of the pool water (or adjust the values).
After the 2nd week of operation of the Laguna device, we will reduce the CL to 25% of the original dose and check the pH and alkalinity of the pool water.
After the 3rd week of operation of the Laguna device, we can reduce the CL dose to 0.1 mg / L and check the pH and alkalinity of the pool water again.
After this 3-week operating time, the Laguna will fully replace 90% of the normal content of CL and other similar chemicals that are necessary for pool water maintenance.
This system will save you 75-95% of the chemicals needed to treat the water in the pool, and the water treated in this way is suitable for allergy sufferers and small children. The device is approved by the state testing laboratory E Z U.