Chimney sweep Koníček performs common chimney sweeping work. If you are looking for a chimney sweep from Uherský Brod, Uherské Hradiště, contact me. I am an experienced chimney sweep with years of experience and qualifications in the field of chimney sweeping.
I carry out inspections of chimneys according to the decree or I will clean or advise the chimney in various situations regarding chimneys.
I perform the following chimney work:
- inspection of chimneys according to government regulation 34/2016 Coll.
- revision of flue gas paths
- chimney cleaning and inspection of chimney vents
- construction of brick system chimneys
- installation of stainless steel chimneys
- chimney lining
- cleaning of jammed chimneys
- consulting in the field of chimney sweeping.
Thorough control or revision of combustion paths is also important. Flue gas path inspection is a check of the flue gas path of the chimney and it is always necessary to perform it:
- before putting the flue gas path into operation
- when changing the fuel of the connected appliance
- before replacing or reinstalling the fuel appliance
- after a chimney fire.
It is necessary to carry out this inspection due to the decree on fire safety in the operation of chimneys, flues and appliances ordered by the government.
Call the chimney sweep and inspect the chimney in time. There is a risk of fires, carbon dioxide poisoning due to defects in the flue gas path, such as:
- failure to maintain a safe distance of flammable structures from the chimney
- gaps in joints
- failure to observe the height of the chimney above the roof
- the mouth of the chimney is shaded by adjacent roofs
- stranded chimney
- failure to observe the wind angle of the chimney
- poorly executed plaster and chimney linings
- incorrect orientation of chimney liners.
The flue gas inspection may only be performed by a person who:
- has a trade license in the field of chimney sweeping
- is a specialist in the safety of chimney systems
- is a flue gas inspection technician.
The control of the flue gas path is performed by assessing:
- safe location of flammable building structure, material and object in the vicinity of the flue gas path and the connected appliance
- chimney according to its fire safety and operability
- free and safe access to the chimney for sweeping, cleaning and inspection routes
- ensuring fire safety of the building during the passage of the flue gas path through the building structures, attic space or roof and flue gas outlets through the peripheral wall of the building
- assessment of the construction and technical condition of the chimney.