Industrial Starter Czech s.r.o.
NOVAPAX CZ s.r.o.
PROFICOLOR, spol. s r.o.
GAMA OCEL, spol. s r.o.

Even today, the craft still indispensable. Upholstery, tailoring, construction craft work, art work, mechanical engineering craft, chimney sweeping, restoration work and other crafts are necessary in everyday life of each person.

MONTEMA, spol. s r.o.
MONTEMA, spol. s r.o. is a Czech company from the Zlín Region focusing on steel structures, technological units, and industrial piping systems. The company also performs the removal of machinery and various equipment. We assemble and disassemble steel structures, technological units, and production lines both in the Czech Republic and ...
Asociace gumarenske technologie Zlin s.r.o. AGT Zlin
Asociace gumarenske technologie Zlin s.r.o. (Association of rubber technology Zlin Ltd.) from the Czech Republic, which is also a member of the European Union, is engaged in the production, construction and trade of the rubber industry. We carry out rubberizing of rollers, pulleys, wheels. We produce rubber-metal parts, building bladders and we ...
SV vyrobni, s.r.o.
SV vyrobni, s.r.o. is a company from the Czech Republic, a member of the European Union, with many years of production experience. It focuses on metalworking and manufacture of evolute, helical and leaf springs, including spring elements. We operate not only in the whole Czech and Slovak Republic, but also abroad. Our manufacturing ...
Zekof, s.r.o.
The company Zekof, s.r.o. in Lostice near Sumperk specializes in conventional machining, such as turning, milling, metalworking and drilling. In our machining center we carry out precise machining on CNC machines, including 3D measurement. For the production we use rich machinery equipment, from the vertical lathe (carousel) to the horizontal ...
Pridal s.r.o.
We are an established, purely Czech company from the Olomouc Region, focused on machine engineering and metal production. It was established in 1991 as PRIMA Kralice and in 1999 it transformed into the Pridal s.r.o. company. We carry out not only CNC bending of tubes and sections, but we also specialize in producing single-purpose machines and ...
PIRES s.r.o.
PIRES s.r.o. is active in industrial sectors. We are a company from the Czech Republic that is an EU member state. We specialise in burner and heating systems for industrial furnaces and ovens, including control stations for heating and technical gases (natural gas, oxygen, hydrogen, nitrogen, acetylene and more). We install, repair, test and ...
ZAKO Turcin, spol. s r.o.
ZAKO Turcin, spol. s.r.o. Zlin-Breznice is a Czech engineering company focusing on metal machining, assembly units, custom metalworking, custom manufacture of metal and machine parts. We carry out robotic welding of constructions - IGM 477-S 7-axis welding robot. We have our own thermally insulated hall which has been extended with a new annexe ...
ELMEP s.r.o. Prumyslova automatizace Melnik
We specialize in complex services and supplies of automation technologies. We provide system solutions for industrial companies. Our employees are experienced in repairing and maintaining devices, regulating and measuring in the tough environment of companies engaged in chemical industry. We operate in the Czech Republic, as well as abroad, and ...
Chropynska strojirna, a.s.
Chropynska strojirna is a company from the Czech Republic which supplies welding, assembly and conveyor lines for automotive industry. We produce cubings, checking, welding and assembly fixtures, single purpose machines, injection moulds for plastics, checking devices, electrical switchboards and installations. We also provide all services in ...
GIOMETAL s.r.o.
We are a Czech company providing services in the area of ventilation/air conditioning and metalworking. We supply our products to the Czech market as well as to other European Union countries. We have been active in the market since 2003, when we started to engage in the production of ventilation and air-conditioning components, followed by ...
PKD, s.r.o.
PKD s.r.o., based in Daeice in the Czech Republic, is engaged in production, design and assembly of steel structures. Our other activities include blasting, painting and robotic welding. Our company with international presence ranks among the most modern producers of steel structures and halls in the Czech Republic. We own one of the most ...
ELLIT PLUS Tomas Husty
ELLIT PLUS is a company located in the Czech Republic, a member of the European Union, which specializes in electrochemical polishing and surface finishing of metals and metal structures, including pickling and passivation of stainless products. We manufacture products from stainless steel of various shapes and sizes not only in the Czech ...
S & R, CH KOVO s.r.o.
Products from sheet metal and thin-walled sections. Metal production: - Sheet metal cutting and bending - CNC processing of thin sheet metal - locksmith's production / metalwork - powder coating up to part size of 6000 x 1500 x 800 mm - extractor hoods / kitchen vapour exhausters. Machinery: Laser cutting machine Byspeed 4020/4400 ...
ALFEKO s.r.o.
ALFEKO s.r.o. is a company based in the Czech Republic - a member state of the European Union. The company is a producer and supplier of aluminium and iron structures. We specialize in particular in manufacturinga variety ofstainless-steel slides, water slides and tube slides. Our company also ranks among the leading manufacturers of lightweight ...
LAGUS s.r.o.
LAGUS s.r.o., with registered office in Jihlava, is from Czech Republic, a Member State of the European Union. It focuses on the manufacturing of special, custom fasteners, screws, nuts, clips, micro screws, washers and cold forming work. We focus primarily on the high quality of our products, which meet the requirements of the VDA and ISO TS ...
KOVONA SYSTEM, a.s.
KOVONA SYSTEM, a.s., a company from the Czech Republic, which is part of the European Union, a member of the INDUSTRIAL SYNERGY Group, is a modern company engaged in large-lot custom cold steel processing. Its production program is focused mainly on processing of steel strips and profiles using a wide range of technologies. It provides its ...
Buhler CZ s.r.o.
Engineering production: Spare capacity for precision machining! - gearboxes: - spur gearboxes, angle transmissions, worm-gear systems, planetary gearboxes, distributing gears, etc. - special gearboxes, including assembly and run-in according to customer's documentation - cam gears - shafts up to 150 mm diameter, 2000 mm length - ...
Plastpol, s.r.o.
We are PLASTPOL s.r.o. (Ltd) from Nova Ves near Nove Mesto na Morave, which deals with custom and serial CNC machining of plastics, wood, aluminum and other non-metallic materials, as well as their milling and turning. Our services: - custom and series machining of non-metallic materials - preparation of semi-finished products and production ...
SV Metal spol. s r.o.
SV metal offers solution in the fields of production from thin sheet metal. We are also focusing on machinery manufacture in small and medium series. We provide customer service. Metal fabrication: - processing of thin metal sheets Production of single-purpose machines. CNC machining: CNC milling on the STYLE BT-15005 machine CNC turning ...
Strojirna Kukleny spol.s r.o.
The Strojirna Kukleny spol. s r.o. company. Custom production of machines and equipment for demanding conditions. We use universal machine equipment for machining and metal working. We have our own construction capacities and workers qualified in all engineering fields for the solution of various tasks. Manufacturing program: - ...
SLEVARNA ANAH Prostejov, s.r.o.
SLEVARNA ANAH Prostejov s.r.o. is a family company from the Czech Republic, member state of the European Union. We are a traditional manufacturer of grey iron castings. The foundry has its own pattern shop and focuses on finish treatment and production of castings, e.g. for engineering, automotive and building industries. We operate not only in ...
DELTACOL CZ s.r.o. clen BRANO GROUP (provozovna Litovel)
DELTACOL CZ Ltd. company is a firm from the Czech Republic and the European Union Member State that carry out zinc plating, chrome plating and passivation of aluminium with Alodine preparation. Our plating shop is a professional in the field and we operate not only in Olomouc, but also throughout the Czech Republic and ...
AR Brno, spol. s r.o.
Flat, neck, blind, oval, drawing flanges. - Neck, flat, slip-on, threaded flange - Welding ring - T pieces - Y pieces - Edge with neck - Slab bottom - Tube socket - Tubular transition - Reduction - Tube sockets - Pipeline blind flanges - Slab bottoms - Rings - Various welded-on pieces - Welded shaped pieces - Pipes. We produce ...
SEFO plus, s.r.o.
SEFO plus s.r.o. (Ltd.) based in Frystak near Zlin is a company from the Czech Republic, which is the state of the European Union. It is one of the largest companies in the field in Europe. SEFO plus s.r.o. is engaged in the production of punching knives, clicking dies, and perforating dies (matrices) for shoemaking and leather companies. It ...
V.Radon a spol. Strojirna Velim v.o.s.
Locksmith´s production and machining Engineering, production: - grinding machines for horizontal building structures made of concrete, terrazzo, marble... - arm grinders for stonecutters for surface finishing of cemetery architecture and building components - vibrating tables for concrete mix - metal furniture - wire programme for equipment ...